G5Q series is a pole 10A switching capacity of small power relays, specifications 20.3 * 10.3 * 15.8mm. G5Q series features include a high switching performance for a variety of loads, there 1a / 1c 8kV contact and ensure withstand voltage ( coil - contacts between) the small relay. Dongguan trickle Lin Electronics Co., Ltd. Main: Omron Omron products relays, switches, connectors; thermostat, PLC, sensors, safety door switches, etc. series of electronic components and industrial products. G5Q-14 reference parameters by type of protection contacts constitute a minimum standard packaging units sealed plastic models rated coil voltage (V) 1c G5Q-14 DC 5 40 pieces / rod DC 9 DC12 DC24 Note. When ordering, please indicate the coil Rated voltage (V). Example: G5Q-14 DC12V addition, packaging and labeling of voltage specifications mark the delivery time for □□ VDC. RATINGS Contact configuration Rated voltage (V) Rated Current (mA) Coil Resistance (Ω) operating voltage (V) reset voltage (V) Maximum allowable (V) Power consumption (mW) 1c DC 5 40 125 75% below 5% more than 190% (23C) by about 4 009 22.2 40 512 16.7 72 024 8.3 2,880,580,639 44.4 33.3 36 024 16.7 20 212 1440 Note 1. The rated current and coil resistance coil temperature of + 23 ° C when the tolerance ± 10%. 2. The operating characteristics of the coil temperature of + 23 ° C when. 3. The maximum allowable voltage for the maximum voltage can be applied to the relay coil. Switch portion (contact portion) project load resistive load contact structure 1c single Ag alloy contact material (Cd-free material) AC125V 10A (NO) AC125V 3A (NC) AC125V 3A (NO) AC250V 3A (NC) AC250V 3A (NO) DC 30V3A (NC) DC 30V 5A (NO) Rated thermal current 10A (NO) / 3A (NC) contacts maximum voltage AC277V, DC30V contact current maximum AC: 10A (NO) / 3A (NC) DC: 5A (NO) / 3A (NC) Performance Project contact resistance between the classification standard operating time * 1 100mΩ following reset time 5ms or less 10ms or less Insulation resistance * 2 1,000MΩ more pressure coil and contacts AC4,000V 50 / 60Hz 1mm with inter-electrode contacts AC1, 000V 50 / 60Hz 1mm withstand voltage withstand voltage (between coil and contacts) 8kV (1.2X50us) vibration durable 10? 55? 10Hz single amplitude 0.75mm (double amplitude 1.5mm) malfunction 10? 55? 10Hz single amplitude 0.75mm (double amplitude 1.5mm) impact durable 1000m / s2 malfunction 100m / s2 mechanical life over 10 million times (switching frequency of 18,000 times / h) Electrical * NO side contact AC125V 10A resistive load more than 50,000 times (switching frequency of 1 second 〇N_3 sec OFF) AC125V 3A resistive load of more than 20 million times (switching frequency of 1 second ON-1 秒 OFF) AC250V 3A resistive load of more than 10 million times (switching frequency of 1 second ON - 1 秒 OFF) DC 30V 5A resistive load of more than 10 million times (switching frequency of 1 second ON - 1 秒 OFF) * NC side contact AC125V 3A resistive load of more than 20 million times (switching frequency of 1 second ON - 1 秒 OFF) AC250V 3A resistive load of more than 10 million times (switching frequency of 1 second ON - 1 sec OFF) DC 30V 3A resistive load of more than 10 million times (switching frequency of 1 second ON-1 秒 OFF) failure rate P level (reference value * 4) DC5V 10mA Ambient temperature -40 ~ 85 ° C ((no icing, No non-condensing) Ambient humidity 5 85% RH Weight Approx 6.5g Note 1 above initial values ??* Measurement conditions:?..... according to the voltage drop method under conditions DC5V 1A * 2 Measurement conditions: with DC500V megger the same position with the measured pressure. * 3 This is the switching frequency of 120 beats / min when the value.